Binetto Bike Cover Installation Instructions

Download PDF

Congratulations on the purchase of your Binetto Scooter cover!

Please carefully read the instructions of cover installation and precautions as outlined in this manual. This will allow you to enjoy the use of your cover for many years to come. All Binetto covers carry a limited lifetime warranty, please read your warranty card for complete details.

All Binetto covers are manufactured using strong polyester coated fabric, 210Denier for Standard covers, 420Denier for the Select Covers. The covers are designed to offer protection from water and weather while being stored. Your cover is equipped with a strong elastic cord to assure a secure and tight fit around your scooter / motorcycle. In addition a tie-down is available for extra tightening. All covers have integrated vents to allow accumulating moisture to escape.

Both Standard as well as Select Binetto covers are offered in two sizes, please be sure to select that size to best fit your vehicle. You may use the Binetto Cover Size Chart for reference purpose. Not all makes and models of motorcycles / scooters are listed; however use this guide to compare with your vehicle.

» Precautions:

  • Do not use this cover while transporting your scooter or motorcycle.
  • Use extra care while weather conditions are windy. Under these conditions too much wind may cause the cover to "inflate" and tip your vehicle.
  • Never apply cover to your vehicle while the engine is running.
  • Take extra precaution with sharp objects while installing your cover.

» Cover Installation:

  1. Unfold the cover and locate the FRONT tag on the cover.
  2. Start by positioning front part of cover on your vehicle.
  3. Allow the cover to wrap around the front tire and slowly pull over steering wheel.
  4. Make sure all parts surrounding front wheel are covered.
  5. Proceed to pull the cover over the entire vehicle along the sides, paying special attention to any hindrance points sticking out. This may prevent the cover from having a tight fit all around your vehicle.
  6. Finish by wrapping the cover around back tire to cover the entire vehicle.
  7. When finished briefly walk around the vehicle making any necessary adjustments for a perfect fit. You may then secure the cover with integrated tie down.

Please take precaution when removing cover as it may get stuck around sharp objects of your motorcycle / scooter, causing it to tear.

» Care & Maintenance:

Binetto covers do not require any specific maintenance. In order to clean dirt or spots you may use water, soap and a light brush. Do not machine wash, rinse or tumble dry. Do not treat the cover with any chemicals.

Please note that although the cover is equipped with UV protective material, fading may occur and is considered normal wear and tear of your cover.